PE-Tech
PE-TECH HDPE Pipes are used for high-pressure potable water, agricultural and industrial applications. These pipes are manufactured using the most modern pipe manufacturing technology utilizing German-made machinery and adapting German technology. These equipment, from the extruders to the winders utilizes the most modern microprocessor controls to ensure that these pipes conform with the highest quality standards.
PE-Tech pipes are manufactured using vacuum-sizing technique as it is the latest, most versatile, most uniform and proven method in the world. This production method is supplemented with the high efficiency output rate of our machines having one of the fastest production lines in the world.
PE-Tech pipes is licensed by the Bureau of Product Standards (BPS) under the modified Quality Product Standards mark (Q Mark) and is DAO-1 compliant certified and is accredited by the Local Water Utilities Administration ( LWUA ).
Description
| Material | HDPE Pipe PE 80, PE 100 |
| Standard | ISO & CTS Standards |
| Sizes (mm) | 20, 25, 32, 40, 50, 63, 75, 90, 110, 160, 225, 280, 315, 335, 400, 450 |
| Nominal Sizes (inch) | 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 6, 8, 10, 12, 4, 16, 18 |
| SDR Rating | SDR 9 SDR 11 SDR 13.6 SDR 17, SDR 17, SDR 21 |
| Pressure Rating (PSI) | 200 160 128 100 |
| Length | Standard Lengths Or Cut to Length Specification |
| Color | Black / Blue / Made to Orders Colors |
Exceptional Features
- High Pressure Rating
- Corrosion Ressitant
- UV Rays Protected
- Fast & Easy Installation
- Smooth & Pin Hole Free
Processed using
- 100% Non-toxic Material
- 100% German Equipment
- Using the Most Modern Technology in HDPE Extrusion
- Vaccum Forming Tecnology
• For pressurized irrigation watering system.
• For potable water distribution from source to end-user.
• For telecommunication applications.
• For irrigation and watering systems for farms, plantations and nurseries.
• Can be used for waste water applications.SpecificationsFeaturesCHEMICAL RESISTANCE
| 32mm x 1/2” | 90mm x 1/2” |
| 32mm x 3/4” | 90mm x 3/4” |
| 32mm x 1/2” | 90mm x 1/2” |
| 32mm x 3/4” | 90mm x 3/4” |
| Format | ISO& & CTS standards |
| Sizes Available | 20 – 160 mm (ISO) & 1/2″ – 2″ (CTS) |
| Length | Standard & customized |
| Pressure Rating | 100 – 200 psi |
| Specific Gravity Rating | 0.940 – 0.955 |
| Finishing | Semi-matte to polished finish for both inside and outside surfaces. |
| ISO Series | SDR 9, 11, 13.5 & 17 |
| CTS Series | SDR 9 & 11 |
| LONG LIFE EXPECTANCY | |
| PE-TECH is further stabilized using the most efficient UV absorber against UV degradation. It has low notch sensitivity, high tear strength, excellent scratch
resistance and superior resistance against long term environmental stress cracking. |
|
| FLOW FACTORS | |
| PE-TECH pipe has very good flow properties. Its smooth inner surface, non-wetting characteristic, excellent chemical & abrasion resistance gives and maintains
excellent flow properties throughout its service life. |
|
| TOUGH & FLEXIBLE | |
| The inherent resiliency and flexibility of PE-TECH allows the pipe to absorb surge pressure, water hammer, vibration & stresses caused by earth movements. | |
| SUPER STRENGTH | |
| Super strength PE-TECH HDPE pipes will handle pressure 25% greater than any HDPE pipe now in use or it will handle the same pressure with 20% thinner walls. | |
| EASILY JOINED | |
| PE-TECH is easily joined by any of several techniques. Its ductility & flexibility allows insert, flange adapters & flare type fittings to be used; yet is rigid enough for
use in compression fittings. |
|
| LIGHTWEIGHT | |
| PE-TECH is 70-90% lighter than concrete, cast iron or steel and consequently economical to ship & simple to install. | |
| PE-TECH is generally inert within its temperature use range to most chemical reactions because of its polyethylene structure and can be used to transport chemicals or
be installed in an environment where these chemicals are present. |
Reviews
There are no reviews yet.